Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Aldine, TX
Gate access control in Aldine means keypads, card readers, and intercoms that survive industrial corridor dust, black-clay soil movement, and humidity that corrodes cheap circuit boards. We service the full range of entry systems on Aldine’s 1960s-to-1980s ranch homes and the heavy commercial slide gates along the Hardy Toll Road freight corridor. For a written price before any work starts, call (346) 296-3138.
Why Aldine Homes Are Different
Aldine is unincorporated Harris County, so gate permits and inspections run through the county permitting office, not a city building department. Out-of-area contractors get tripped up on this regularly. The housing stock is mostly 1960s-1980s ranch homes, many converted to rentals, where ornamental iron and chain-link driveway gates were added piecemeal over decades. Those gates were often set in undersized concrete footings that shift and tilt in Harris County’s expansive black clay. The soil swells during intense rainfall and shrinks in dry stretches, cyclically heaving gate posts out of plumb. That means a gate that opens cleanly in March may drag and bind by July. Low-lying sections near Greens Bayou and other drainage corridors saw widespread operator submersion during Hurricane Harvey, and flood-driven motor and underground-wiring failures remain a recurring repair category here that would be rare in drier metros. Along Aldine Mail Route Road and the Hardy Toll Road access roads, we see heavy-duty slide gates sized for 18-wheelers, often with commercial loop detectors embedded in repeatedly patched asphalt. Detector diagnostics are a constant part of every service call in those areas.
Our Main Aldine Services
Most Aldine homeowners and property managers call us for one of three services: repair, installation, or motor and opener work. Each has its own page with local pricing and details.
Gate Repair in Aldine
Repair work in Aldine covers everything from re-hanging a dragging gate to replacing bent rails, damaged pickets, or failed weld joints. The black-clay soil here means post lean and gate drag show up constantly, and we address the footing issue rather than just adjusting hinges. See Gate Repair in Aldine for full pricing and scope.
Gate Installation in Aldine
New gate installation in Aldine requires accounting for soil movement from day one. We size footings deeper than typical residential work because the clay expansion cycle will otherwise tilt a new gate within a few wet seasons. For a complete breakdown of what’s included, read Gate Installation in Aldine.
Gate Motor & Opener in Aldine
Motor and opener service in Aldine spans nine automation brands and covers everything from limit-switch resets to full operator replacement on swing and slide gates. Flood-related motor failures in low-lying areas near Greens Bayou are a recurring job type. Details and pricing are on Gate Motor & Opener in Aldine.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Aldine
Gate access control in Aldine is the layer that decides who gets through: keypads, phone entry, card readers, and video intercoms wired to the operator. On Aldine’s rental-heavy residential streets, the most common call is a keypad that stopped responding or a phone-entry module that dropped its programming. On the industrial strips along Aldine Mail Route Road, the calls lean toward card readers and heavy-duty keypads on slide gates that see hundreds of cycles a day. Our Gate Access Control work always ends with a written record of what was programmed, what was wired, and what part number went in.
Keypad Entry
Signs you need it
The keypad works intermittently after rain, the backlight is dead, or codes reset without warning.
What it costs in Aldine
Replacement keypads in Aldine typically run $110-$280 installed, depending on the brand and whether the wiring is intact.
How we do it
We test the existing wiring, install the new keypad or replace the failed board, program the codes, and photograph the finished work.
Video Intercom
Signs you need it
The video feed is black, audio cuts out, or the indoor monitor won’t ring when the outside station is pressed.
What it costs in Aldine
Video intercom replacement in Aldine lands between $850 and $2,600 depending on monitor type, wiring condition, and camera resolution.
How we do it
We identify the failed component, replace or re-terminate the wiring, install the new unit, and walk you through pairing.
What Gate Access Control Costs in Aldine
| Item | Typical range in Aldine |
|---|---|
| Keypad replacement | $110 - $280 |
| Card reader system | $800 - $2,400 |
| Video intercom | $850 - $2,600 |
Can you add a keypad to my existing gate opener?
Yes, in most cases. We wire the keypad into the open and close terminals on your operator, program the codes, and test cycle the gate. The written price covers parts and labor. Call (346) 296-3138 for a firm quote.
Why does my gate keypad stop working after heavy rain in Aldine?
Water intrusion is the usual cause, often through degraded gaskets or corroded wire nuts where the keypad meets the post. Aldine’s humidity and intense rainfall accelerate this. We use sealed connections and dielectric grease on every install. Call (346) 296-3138 to schedule an inspection.
Gate Parts & Welding in Aldine
Gate parts and welding in Aldine comes down to two recurring realities: the black-clay soil keeps pulling posts out of plumb, and 60s-era ornamental iron gates were often welded thin. Hinges snap, posts lean, and rails crack at the wheel track. See Gate Parts & Welding for the full scope, but the short version is that we repair what’s failed rather than pushing a full replacement.
Hinge Replacement
Signs you need it
The gate scrapes the ground at the latch side, or the hinge bolts show visible rust and the gate sags when you release it.
What it costs in Aldine
Hinge replacement in Aldine runs $90-$300 per hinge, depending on size, material, and whether the post needs reinforcement.
How we do it
We cut out the old hinge, weld in the new one, square the gate, and photograph the alignment.
Post Replacement
Signs you need it
The post leans visibly more after rain, the gate drags at the free end, or concrete at the base is cracked and heaving.
What it costs in Aldine
Post replacement in Aldine generally falls between $250 and $600 per post, including the new steel or ornamental post and a footing sized for the clay.
How we do it
We saw the old post at grade, set the new post in a deeper footing, brace it plumb, and re-hang the gate once set.
What Gate Parts & Welding Costs in Aldine
| Item | Typical range in Aldine |
|---|---|
| Hinge replacement | $90 - $300 per hinge |
| Post replacement | $250 - $600 per post |
| Gate roller replacement | $50 - $150 per roller |
Can you weld my broken gate instead of replacing the whole thing?
Yes, and in Aldine it’s usually the right call. We grind the crack clean, weld it solid, and reinforce the joint with a gusset if the original design was undersized. Call (346) 296-3138 for a written price.
Why does my gate post keep leaning after every rain in Aldine?
The black clay under Aldine expands when wet and shrinks when dry, heaving the footing out of alignment. A proper fix means setting the post deeper and wider than typical residential work. Call (346) 296-3138 to schedule an assessment.
Brands We Service in Aldine
We work on Ghost Controls, DoorKing, and Elite equipment regularly in Aldine, along with six other major automation brands. Common boards, remotes, and photo-eyes are stocked locally for same-week repairs. See our brands for the full breakdown.
Pricing for Gate Repair in Aldine, TX
| Service | Typical range in Aldine |
|---|---|
| Gate repair service call | $75 - $125 |
| Keypad replacement | $110 - $280 |
| Card reader system | $800 - $2,400 |
| Video intercom | $850 - $2,600 |
| Hinge replacement | $90 - $300 per hinge |
| Post replacement | $250 - $600 per post |
| Gate roller replacement | $50 - $150 per roller |
| Gate motor replacement | $450 - $1,200 |
In Aldine, two things push gate repair prices upward: black-clay soil movement that forces deeper footings, and the higher share of heavy commercial slide gates on the industrial corridors near Bush Intercontinental Airport. Every price on this page reflects the range for residential work; commercial slide gate repairs are quoted after an on-site assessment. All work is priced in writing before we pick up a tool.
Neighborhoods We Serve in Aldine
We serve the full Aldine area, from the industrial strips along Aldine Mail Route Road to the residential blocks near Greens Bayou and the Hardy Toll Road corridor. Response time for most Aldine calls is same-day or next-day depending on part availability.
- Greenspoint area
- Eastex Jensen area
- Hidden Valley
- Westfield
- East Aldine
Service Area - Cities Near Aldine
For gate repair beyond Aldine, we also serve Spring, TX, The Woodlands, TX, Tomball, TX, and Conroe, TX. Dispatch coordinates from our Houston metro office, and crews serve Aldine locally.
Serving Aldine, TX - Our Local Coverage Area
We’re based in the Aldine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Aldine
Aldine is unincorporated Harris County, so gate permits run through Harris County permitting, not a city building department. Most repair work does not require a permit, but new installations with electrical runs often do. We verify the current rules before starting and include permit coordination when required. Call (346) 296-3138 if you are unsure.
Most Aldine calls are scheduled same-day or next-day. A live person answers the phone 24/7, so you will speak to a dispatcher, not a voicemail loop. We provide the technician’s name and photo before arrival. Call (346) 296-3138 to get on the schedule.
The black-clay soil cycles through heavy swelling and deep shrinkage every wet-dry season, heaving posts and stressing hinges and welds repeatedly. Low-lying areas near Greens Bayou also face flood-related operator and wiring failures. We size footings and specify parts to handle those conditions rather than repeating the same fix. Call (346) 296-3138 for an assessment.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Aldine Customers Say
"Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C.