Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Jacinto City, TX
Gate access control problems in Jacinto City follow a pattern we see all over this part of Harris County: keypads that work until the first hard rain, card readers corroded by air carrying sulfur from the Ship Channel, and gate frames so racked by shifting clay that the lock simply won’t catch anymore. Most homes here were built from the 1940s through the 1960s, and the gates on those fences are often original or one generation removed. If your gate won’t open, won’t lock, or the keypad stopped responding, call (346) 296-3138 and we’ll send a technician who has worked on this exact failure in Jacinto City before.
Why Jacinto City Homes Are Different
Jacinto City sits right next to the Houston Ship Channel, and the air here carries sulfur compounds and industrial particulates that eat through standard gate paint in two to three years. That same paint would last a decade in an inland suburb. We’ve pulled hinges off gates barely five years old and found the bolts fused solid with rust. The soil makes it worse. The clay under Jacinto City swells and shrinks with every rain and dry spell, and because the ground is flat and low, water doesn’t drain. Posts heave, frames rack out of square, and gates that latched fine in March won’t close in October. Homeowners here can’t treat their gate as a one-time purchase. It’s a maintenance cycle, and the people who plan for it spend less than the ones who don’t.
Our Main Jacinto City Services
These are the three services Jacinto City homeowners call us about most often. Each has its own detailed page covering local pricing, timeframes, and what the work looks like on a 1950s fence line.
Gate Repair in Jacinto City
A sagging gate on a small Jacinto City lot usually means a worn hinge, a cracked post footing, or a frame that’s been pulled out of square by clay movement. We repair all three on site. For a full breakdown of repair costs and what a same-day visit covers, see Gate Repair in Jacinto City.
Gate Installation in Jacinto City
New gates on Jacinto City’s tight lots have to account for standing water at the post base and the corrosion coming off the Ship Channel. We spec frames, hinges, and coatings for this environment, not for a generic Houston suburb. Details and written pricing are on Gate Installation in Jacinto City.
Gate Motor & Opener in Jacinto City
Swing gates and slide gates both run motors here, and the humidity plus sulfur means actuators fail earlier than their rated life. We service LiftMaster, Viking, DoorKing, and the rest of the major brands without steering you toward a replacement. See Gate Motor & Opener in Jacinto City for the full rundown.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Jacinto City
Gate access control in Jacinto City means keeping a keypad, card reader, or phone-based entry system working on a gate that sits in one of the most corrosive air environments in Texas. We service the full range of systems under our Gate Access Control practice, and for Jacinto City specifically we see two problems more than anywhere else: keypad membranes that delaminate from humidity and heat, and card reader contacts that pit from sulfur exposure in the air. The old postwar homes here often mean narrow driveways and gate posts set decades ago in clay that hasn’t stopped moving.
Keypad Entry
Signs you need it
The keypad works intermittently, or some buttons require hard presses while others don’t respond at all.
What it costs in Jacinto City
Keypad entry work here typically runs from $180 to $450, depending on whether it’s a wiring repair, a new keypad, or a full system replacement.
How we do it
We test the circuit, replace or rewire the keypad, program the codes, and photograph the finished wiring before we leave.
Remote Control
Signs you need it
The gate ignores the remote, or the range has shrunk so much you have to touch the bumper before it opens.
What it costs in Jacinto City
Remote control repairs and new transmitters in Jacinto City run from $150 to $320.
How we do it
We check the receiver, test the frequency, replace the remote or receiver as needed, and hand you a written record of what was changed.
Phone Entry
Signs you need it
Callers hear ringing but the gate never opens, or the entry system drops calls after one ring.
What it costs in Jacinto City
Phone entry repairs and upgrades in Jacinto City run from $350 to $800, depending on whether the cellular unit needs replacing.
How we do it
We verify the phone line or cellular connection, test the relay, replace the control board if needed, and document the setup.
What Gate Access Control Costs in Jacinto City
| Item | Typical range in Jacinto City |
|---|---|
| Keypad entry repair | $180 – $450 |
| Remote control repair/replacement | $150 – $320 |
| Phone entry system repair | $350 – $800 |
Does Jacinto City’s humidity damage keypads?
Yes. The combination of high humidity and airborne sulfur from the Ship Channel causes keypad membranes to delaminate faster here than almost anywhere else in Houston. We install weather-sealed keypads and photograph every connection so the next failure is diagnosed faster.
Can you add remote control to an existing gate in Jacinto City?
Yes. We can retrofit a receiver to most existing gate operators, including older DoorKing and Linear units still common on Jacinto City properties. The work typically takes under two hours, and the written price is confirmed before we start.
Gate Parts & Welding in Jacinto City
Gate parts and welding in Jacinto City are rarely cosmetic. The sulfur-laden air near the Ship Channel corrodes hinges, latch bolts, and post caps fast enough that a five-year-old gate can look ten years old. Our Gate Parts & Welding work here focuses on replacing the components that fail structurally: hinges that have seized, posts that have cracked at the base from water intrusion, and frames that need welding to restore square corners after the clay underneath shifted.
Hinge Replacement
Signs you need it
The gate drags on the ground, squeals when it moves, or the hinge bolts look rusted and swollen.
What it costs in Jacinto City
Hinge replacement in Jacinto City typically runs from $150 to $400 per hinge, depending on post condition and gate weight.
How we do it
We cut or extract the old hinge, weld or bolt the new one, level the gate, and photograph the final alignment.
Post Replacement
Signs you need it
The post leans visibly, the gate sags at the latch side, or there’s a horizontal crack near the concrete or soil line.
What it costs in Jacinto City
Post replacement here runs from $250 to $600 per post, more if the old footing has to be broken out of saturated clay.
How we do it
We remove the old post, set a new one below the frost and water line with proper drainage, and rehang the gate square.
Custom Welding
Signs you need it
A hinge has torn off the frame, a corner joint has cracked, or you need a section of tube steel replaced after corrosion.
What it costs in Jacinto City
Custom welding on gates in Jacinto City runs from $200 to $850, depending on the length of weld and the amount of rust removal first.
How we do it
We grind to clean metal, weld the repair, and document the work with photos and a written description of every weld.
What Gate Parts & Welding Costs in Jacinto City
| Item | Typical range in Jacinto City |
|---|---|
| Hinge replacement | $150 – $400 per hinge |
| Post replacement | $250 – $600 per post |
| Custom welding | $200 – $850 |
Can you weld a gate still attached to the post?
Usually, yes. We can weld most frame repairs in place with the gate supported, as long as the post and hinges are structurally sound. If the post is rotted or the frame is too far out of square, we’ll tell you before any work starts.
Do you replace parts on gates from the 1960s?
Yes. We carry or order replacement hinges, rollers, latch bolts, and other parts that fit the older gate styles still common in Jacinto City. The written price is confirmed before we begin, and the part number is on the record we leave with you.
Brands We Service in Jacinto City
We service and stock parts for the automation brands most common on Jacinto City driveways: Linear, Viking, Ghost Controls, and DoorKing. We keep common boards, remotes, and safety edges in local inventory, which means most repairs go from diagnosis to finished job the same visit. See our brands for the full list.
Pricing for Gate Repair in Jacinto City, TX
| Service | Typical range in Jacinto City |
|---|---|
| Keypad entry repair | $180 – $450 |
| Remote control repair/replacement | $150 – $320 |
| Phone entry system repair | $350 – $800 |
| Hinge replacement | $150 – $400 per hinge |
| Post replacement | $250 – $600 per post |
| Custom welding | $200 – $850 |
| Gate motor replacement (swing) | $850 – $2,100 |
| Gate motor replacement (slide) | $950 – $2,400 |
| Gate opener repair | $185 – $550 |
| Full gate installation (residential) | $1,400 – $5,600 |
Prices go up in Jacinto City when we have to break out a post footing set in saturated clay, remove rust-scale before welding, or replace a control board that salt and sulfur air have already compromised. Whatever the number, you get it in writing before any work starts.
Neighborhoods We Serve in Jacinto City
We work throughout Jacinto City, including the residential streets off Holland Avenue, the blocks east of Mercury Drive, the area around Jacinto City Elementary, and the neighborhoods near the Ship Channel side where corrosion runs fastest. Response time in Jacinto City is typically same day for most gate repair and access control calls.
- Holland Avenue corridor
- Mercury Drive area
- Jacinto City Elementary district
- Ship Channel adjacent streets
Service Area - Cities Near Jacinto City
We serve gate repair, access control, parts, and welding customers throughout greater Houston. Nearby, you’ll find our crews working in The Woodlands, TX, Tomball, TX, Conroe, TX, and Spring, TX. Scheduling is coordinated through our Houston office, and dispatch covers all of these communities.
Serving Jacinto City, TX - Our Local Coverage Area
We’re based in the Jacinto City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Jacinto City
Most gate repair and access control calls in Jacinto City are handled same day. We dispatch locally, and a live person answers the phone at all hours. You’ll get the technician’s name before they arrive, and the written price before any work starts.
For most repairs, no. Replacing hinges, welding, or fixing an opener doesn’t require a city permit. A complete new gate installation with new posts sometimes needs one, and we check that before scheduling the work so there are no surprises.
Yes. Sulfur compounds from the Ship Channel industrial corridor plus high humidity make bare metal and standard paint fail in two to three years where the same coating lasts a decade inland. That’s why we document every repair and recommend the right coatings for this specific environment.
For gate access control, parts, welding, or any gate repair in Jacinto City, call (346) 296-3138. The price is in writing before we start.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Jacinto City Customers Say
"The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."Good work on a long driveway gate. Arrived when they said, finished when they said."
- Sofia E.